Post by tommy on Sept 22, 2014 15:27:28 GMT -7
I found out Saito makes 3 manifolds for their Saito .62 #SAI15075 is called standard it has an angle of about 40 degrees. #SAI5075C is called Cast/degree and has an angle of about 10 degrees ( don't ask me why) and lastly #SAI50163 is a 90 degree bend called a right angle . These are all M10 or 10 mm. sized. They may have the same for other motor sizes which will have different metric sizes. Also may fit different makes of 4 strokes. I know it sure simplified an in cowl set up for me.