Post by tommy on Jun 8, 2014 19:23:03 GMT -7
I planted a plane a while back and it did not grow at all, so with winter coming I decided to do some experimenting and it was a Tiger 60 so I added to the main wing some cub wingtips plus a few inches and came up with 82" wing span then I added 30% to the tail end and made it into a flying tail by using raised ribs. I used the same power plant with a different carb which is just enough to keep it flying. It goes well at half throttle and at wide open just makes more noise with very little speed increase. I fly this very flat as I didn't beef up the main spar and it may break if I play with it. But the surprise is it now is classed as 1/4 scale since I now have my 5 flights on it and have flown it at a 1/4 event out of town.